Freeze Dryers | Projects

Delivery, installation & instruction

Ice condenser: -80°C

2-stage vacuum pomp

Delivery & Installation

• Ice condensor -75°C with ca. capacity of 40 liters in 24 hour.
• Water cooled cooling system.
• Shelf package Flexible, 7+1 shelves, W. 450 x D. 750 mm
• Loading area 2,36 m2.
• Shelf temperature -55 up to + 60 degrees C.
• Drying tray, two-parts, 225x750mm,
• Closing device (hydraulic stoppering)
• 2-stage Vacuum pump, 32,2m2/h.
• Miniature temperaturesensor 1.8x12mm
• Combined sensor conductivity/temperature
• Additional capacitive vacuum sensor
• Pressure rise test
• Visualisation software Zirbus Drycontrol, Scada system.
• Installation and training

Installation Sublimator 15 with FAT, IQ + OQ and training

• Condensor temperature choice, -50°C of -75°C
• GMP chamber design
• Special shelf package: Flexible and Variable
• Shelf package temperature adjustable
• Vacuum pump with extra capacity for quick and deep vacuum, oil free Scrollpump
• Miniature temperature sensor
• Control Siemens S7 - 1500
• Visualisation software Zirbus Drycontrol, Scada system
• Factory Acceptance Test(FAT)
• Installation / Operation Qualification IQ / OQ
• Training

Sublimator EKS 150

Installation EKS 150 + Steamboy 30

• Double doors: loading side and unloading side
• It's build in a freezer cell next to an other installed EKS 150
• Rapig defrost system with steam (minimal condensate water in IBC)
• Water from condenser collected in IBC
• Due to limited space placement of condensor on top
• Condensor capacity 150 kg in 24 hours, total 200 kg
• Shelf surface 16,2 m2
• 2x EKS 150 equipped with Drytec software on one pc as requested

Installation of the second EKS 150

Installation Freeze Dryer 5 with OQ & IQ Qualification

• Shelves cooling <- 55 °C
• Condensor  -80°C
• Qualification IQ & OQ
• Visualisation Software Zirbus Drycontrol, SCADA
• GMP compliant chamber

Installation Sublimator 25 with CIP (Cleaning In Place)

• Build in wall
• Network connection with Drytec software
• Condensor opening in technical room
• Different plate distances adjustable
• Qualification FAT, IOQ, FDS, HDS & SDS

Installation EKS 150 + Steamboy 2

• Installation with a steamgenerator and build in the wall
• Capacitor capacity 150 Kg 24 hrs. Total capacity approx. 200 Kg

Installation EKS 150

• Double doors: loading side and unloading side
• It's build in a freezer cell
• Water from condenser collected in IBC
• Software Drytec

Sublimator EKS 30 wit twostep compressor

• Shelves cooling < -55 °C
• Condenser < - 80 °C Mitsubishi SPS with color display
• Software Drytec

Also in use at this location:

• EKS 10
• VaCo 2

Delivery EKS 10 and VaCo 2:

• Sublimator EKS 10-1 -II:
• Shelves cooling < -55 °C
• Condenser < - 75 °C
• Mitsubishi FXN with color display

VaCo 2 II:

• Condensor < - 80 °C
• Controller with color display

EKS 30 with twosteps compressor

• Shelves cooling <- 55 °C
• Condenser <- 80 °C
• Mitsubishi SPS wiht color display
• Software Drytec control
• Cooling by water

Also in use at this location:

• Sublimator 15
• Sublimator 25
• LabStar 40
• Sublimator 5
• Washer
• Multiple Autoclaves
  

• Shelves cooling <- 55 °C
• Condenser < - 80 °C 
• Fast defrost system
• Stopper system 
• Temperature probes and resistance measurement
• Pressure increase measurement

• Shelves cooling < -55 °C
• Condenser <- 80 °C
• Fast defrost system
• Siemens PLC S7 + software Siemens WinCC
• Qualification
• Stopper system
• Temperature probes and resistance measurement
• Weight system
• Pressure increase measurement

• Shelves cooling < -55 °C
• Condenser < - 80 °C
• Qualification
• Stopper system
• Especially manufactured to fit the existing wall

• Stopper system
• CIP system including tank and accessories
• SIP system with steam Generator
• Sample port condensate
• WIT data at badge documentation WinCC
• Flush manufactured to fit the wall with a down flow cabinet
• GMP